Tag Archives: pure waterjet

It is clean water. Most of our customers use softened tap water. Intensifier pumps should be supplied with filter cartridges that clean the water down to 0.5 micron.

Water and Metal

When I used to picture metal cutting, I would always picture incredibly heavy, large machining pieces. Basically the only way I could picture cutting metal was by using metal. However, I later learned that there are other ways to achieve metal cutting, and it is a very interesting process. One option that is becoming increasingly […]

What is the difference between water-only water jet and abrasive water jet?

Commonly, “Water jet”can be used as both “water-only” water jet and “abrasive” water jet cutting. Water-only water jets cut with ultra-high pressure water alone. Abrasive water jets cut with an abrasive material (usually garnet) which added to the water stream. Water-only water jets are used to cut through softer materials such as rubber and foam. Abrasive […]