Tag Archives: vertical cutting force

The effect of AWJ cutting parameters; e.g. pressure, traverse rate and abrasive flow rate on the vertical cutting force was studied in the present paper.

Effect of Cutting Parameters on Vertical Force in AWJ Cutting

Effect of Cutting Parameters on Vertical Force in AWJ Cutting A. I. Hassan1* and R. Kovacevic** *Benha University, Department of Mechanical Engineering, Benha, Egypt1 **Southern Methodist University, Department of Mechanical Engineering, Research Center for Advanced Manufacturing (RCAM), 3101 Dyer St., Dallas, Texas 75275-03372, USA ABSTRACT In abrasive waterjet (AWJ) cutting, the vertical cutting force is […]