Tag Archives: Waterjet Electrical System

All the electrical components don’t need much maintenance. Proximity switch on the hydraulic cylinder may need to be replaced. If the state of the approach switch in the PLC input point does not change (not triggered by the piston), it means the switch is failed, and needs to be replaced.

The reality of waterjet abrasive recycling

It’s not a widespread practice, but that could be changing Because shipping spent waterjet abrasive off to the landfill usually is easy, not too much thought is given to attempting to recycle it. However, in today’s manufacturing world, all aspects of the operation are scrutinized for possible cost savings. That includes looking at abrasive recycling. […]

Waterjet Cutting Electrical System

Sensor and Solenoid Valve The sensors monitor the working situation. The electronic control solenoid valve provides basic switch control functions to the intensifier. All the cable connecting the sensor and solenoid valve are tied together. 1. Temperature sensor When the oil temperature goes over 55°C, it should be manually shut down. 2. right/left approach switch […]